Skip to content

1st Year Chemistry Past Paper 2025 (2nd Annual)

2nd annual sitting.

First Year, 11th Class, FSc Part 1, HSSC-I Chemistry - 2025 2nd Annual

About this paper

This is FBISE's own 1st Year (11th Class) Chemistry question paper from the 2nd annual examination of 2025, as the board published it among its old question papers. Its 2 pages start with Section A, the MCQs answered on the bubble sheet, followed by the written questions of Sections B and C.

Source: Federal Board of Intermediate and Secondary Education, Islamabad, Old Question Papers. The paper is shown as the board published it; its MCQs are solved below.

To prepare for this paper, use the chapter-wise Chemistry MCQs, the chapter notes and the board's model paper.

How to practise this Chemistry paper

Chemistry papers keep returning to definitions with examples, balanced equations, reasons for trends and small mole calculations. Write every equation out and balance it, since an unbalanced equation loses marks even when the idea is right. Keep a list of the reactions and tests you miss, and revise that list instead of the whole book before the exam.

Sit this 2025 paper in one go, with a timer, once the syllabus is done, so that it feels like the real exam. Then mark it honestly from the book, list the topics that cost you marks, and revise only those before you try the next paper.

Chemistry chapters to revise

Chemistry Past Paper 2025 (2nd annual sitting): MCQs with Answers

All 16 MCQs of this 1st Year FBISE paper (Chemistry - 2025 2nd Annual) in order, with the correct option and why it is right. Practise them one by one, or as a timed exam, with the buttons above.

Published by SLO Prep · Reviewer: Nazakat Ali, MPhil Chemistry, 10+ years of teaching experience · How we check our content

  1. 1

    The type of intermolecular forces present between Hydrochloric acid molecules is:

    Medium
    • A: Metallic Force
    • B: Hydrogen Bonding
    • C: Ionic bond
    • D, the correct answer: Dipole Dipole Forces

    Answer: D. Why

    Chlorine pulls the shared electrons more than hydrogen does. So HCl is a polar molecule. Its molecules pull each other by dipole-dipole forces. Hydrogen bonding needs H joined to N, O or F, not Cl.

  2. 2

    The reactant that determines the maximum yield of a chemical reaction is called the:

    Medium
    • A, the correct answer: Limiting reactant
    • B: Catalyst
    • C: By-product
    • D: Excess reactant

    Answer: A. Why

    The limiting reactant is the one that gets used up first. Once it is finished, the reaction stops. So it decides the most product that can be made.

  3. 3

    If 2 moles of $H_2$ react with 32g of $O_2$, the number of moles of $H_2O$ formed will be: $2H_2 + O_2 \rightarrow 2H_2O$

    Hard
    • A: 3
    • B: 1
    • C, the correct answer: 2
    • D: 4

    Answer: C. Why

    Given:
    $n(H_2) = 2\ \text{mol}$
    $m(O_2) = 32\ \text{g}$
    $M(O_2) = 32\ \text{g mol}^{-1}$

    Formula:
    $n = \dfrac{m}{M}$
    $2H_2 + O_2 \rightarrow 2H_2O$

    Solution:
    $n(O_2) = \dfrac{32}{32} = 1\ \text{mol}$
    $2\ \text{mol}\ H_2 + 1\ \text{mol}\ O_2 \rightarrow 2\ \text{mol}\ H_2O$
    $\boxed{n(H_2O) = 2\ \text{mol}}$

  4. 4

    Which property of water is explained by hydrogen bonding?

    Medium
    • A, the correct answer: High surface tension
    • B: Low boiling point
    • C: High vapor pressure
    • D: Low viscosity

    Answer: A. Why

    Hydrogen bonds hold water molecules together strongly. The molecules at the surface are pulled inwards, which gives water a high surface tension. The same bonds give water a high boiling point and a low vapour pressure. So the other options are the wrong way round.

  5. 5

    The enthalpy change when 1 mole of a substance is completely burned in oxygen is called:

    Medium
    • A: Heat of neutralization
    • B: Heat of atomization
    • C, the correct answer: Heat of combustion
    • D: Heat of formation

    Answer: C. Why

    Burning something in oxygen is called combustion. The heat given out when one mole burns fully is the heat of combustion.

  6. 6

    A catalyst increases the rate of reaction by:

    Medium
    • A: Decreasing temperature
    • B, the correct answer: Lowering activation energy
    • C: Changing equilibrium constant
    • D: Increasing activation energy

    Answer: B. Why

    A catalyst gives the reaction a new path with a lower activation energy. More particles now have enough energy to react, so the reaction goes faster. A catalyst does not change the equilibrium constant.

  7. 7

    If an element “X” has 1st ionization energy $495kJ/mol$ and 2nd ionization energy $4560kJ/mol$, this indicates that there is/are ___ valence electrons.

    Medium
    • A: 2
    • B: 3
    • C, the correct answer: 1
    • D: 5

    Answer: C. Why

    The second ionization energy is about nine times the first. This big jump means the second electron comes from an inner, full shell. So the atom has only one electron in its outer shell.

  8. 8

    A conjugate acid–base pair differs by:

    Medium
    • A, the correct answer: One proton
    • B: One neutron
    • C: One electron
    • D: One molecule

    Answer: A. Why

    An acid becomes its conjugate base by losing one proton ($H^+$). For example, $HCl$ and $Cl^-$ differ by one $H^+$. So a conjugate pair always differs by one proton.

  9. 9

    The number of valence electrons in an atom can be deduced from its:

    Medium
    • A: Atomic mass
    • B, the correct answer: Group number
    • C: Isotopic composition
    • D: Density

    Answer: B. Why

    For main group elements, the group number tells the number of outer shell electrons. For example, sodium is in Group 1 and has 1 valence electron. Atomic mass and density do not show this.

  10. 10

    Which of the following has no specific functional group?

    Medium
    • A, the correct answer: Propane
    • B: Acetic Acid
    • C: Butanol
    • D: Ethene

    Answer: A. Why

    Propane is an alkane with only C–C and C–H single bonds. Ethene has a $C=C$ group, butanol has $-OH$ and acetic acid has $-COOH$. So propane has no functional group.

  11. 11

    The reaction of methane with chlorine in the presence of sunlight is an example of:

    Medium
    • A: Elimination
    • B: Electrophilic addition
    • C: Nucleophilic substitution
    • D, the correct answer: Free radical substitution

    Answer: D. Why

    Sunlight splits $Cl_2$ into chlorine free radicals. These radicals take H atoms from methane, and Cl atoms replace them. This is free radical substitution.

  12. 12

    According to Markovnikov’s rule, the stability of carbocations formed during electrophilic addition is explained by:

    Medium
    • A: Dispersion forces
    • B: Resonance effect
    • C, the correct answer: Inductive effect of alkyl groups
    • D: Hydrogen bonding

    Answer: C. Why

    Alkyl groups push electrons towards the positive carbon. This spreads out the positive charge and makes the carbocation more stable. This electron push is the inductive effect, so the more alkyl groups, the more stable the carbocation.

  13. 13

    Which reagent is used to distinguish aldehydes from ketones?

    Medium
    • A, the correct answer: Tollens’ reagent
    • B: Lindler catalyst
    • C: Bayer’s reagent
    • D: Haber reagent

    Answer: A. Why

    Aldehydes are easily oxidised, but ketones are not. Tollens' reagent is a mild oxidising agent. It gives a silver mirror with an aldehyde and no change with a ketone.

  14. 14

    Aldehydes can be oxidized to:

    Medium
    • A: Alcohols
    • B: Ketones
    • C: Esters
    • D, the correct answer: Carboxylic acids

    Answer: D. Why

    An aldehyde has an H atom on its $C=O$ carbon. Oxidation adds an O atom there, so $-CHO$ becomes $-COOH$. The product is a carboxylic acid. Alcohols would come from reduction.

  15. 15

    Which sub-shell can hold a maximum of 14 electrons?

    Medium
    • A, the correct answer: $f$
    • B: $s$
    • C: $p$
    • D: $d$

    Answer: A. Why

    Each orbital holds 2 electrons. The f sub-shell has 7 orbitals, so it holds 14 electrons. The s, p and d sub-shells hold 2, 6 and 10.

  16. 16

    Which of the following halogens exists in solid state at room temperature?

    Medium
    • A, the correct answer: $I_2$
    • B: $Br_2$
    • C: $F_2$
    • D: $Cl_2$

    Answer: A. Why

    London forces get stronger down the group as molecules get bigger. $F_2$ and $Cl_2$ are gases, $Br_2$ is a liquid, and $I_2$ is a solid at room temperature.